QSFP28-100G-B10

100Gbps QSFP28 Transceiver, Bi-di, 1270/1330nm, 10KM

 

Features

• Supports 106.25Gb/s PAM4.
• Built-in 100G PAM4 DSP
• 1270nm DFB laser and PIN receiver for Tx1270nm/Rx1330nm
• 1330nm DFB laser and PIN receiver for Tx1330nm/Rx1270nm
• LC BIDI single receptacle
• Up to 10km reach for SMF
• Hot-pluggable QSFP28 form factor
• Digital Diagnostics Monitoring Interface
• Power dissipation < 4.5 W
• Compatible with RoHS
• Commercial operating case temperature: 0 to +70°C

 

Application

• 100G Ethernet
• Data center
• Infiniband QDR
• Fiber channel

Standard

• 100G Lambda MSA
• QSFP MSA compliant
• Compliant to SFF-8636

 

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Power Supply Voltage	Vcc	-0.3	3.6	V
Signal Input Voltage		Vcc-0.3	Vcc +0.3	V
Storage Temperature	Ts	-20	+85	°C
Operating Humidity	–	0	85	%

 

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Tc	0		70	°C
Power Supply Voltage	Vcc	3.13	3.3	3.47	V
Date Rate per Channel (4*25G NRZ)			25.78125		Gbps
Date Rate per Channel (2*50G PAM4)			53.125		Gbps
Bit Error Ratio (BER) with FEC on			10-12
Bit Error Ratio (BER) without FEC			2.4×10-4
Fiber Length 9/125μm core SMF		–	–	10	km

Notes:

1. Bit-Error-Rate (BER) is tested with PRBS 31 pattern.
2. 100G QSFP28 LR1 requires an electrical connector compliant with QSFP28 MSA which is used on the host board in order to guarantee its electrical interface specification.

 

Optical and Electrical Characteristics

Optical transmitter Characteristics
Parameter	Symbol	Min	Typical	Max	Unit	Notes
Launched Power (avg.) Per Lane	Pavg	-1.4		4.5	dBm
Wavelength Range	λ0	1264.5 1324.5	1271 1331	1277.5 1337.5	nm
Spectral Width(-20dB)	∆λ			1	nm
Side Mode Suppression Ratio	SMSR	30			dB
Extinction Ratio	ER	3.5			dB
Transmitter OFF Output Power	POff			-30	dBm
Optical Modulation Amplitude(OMA outer)	OMA	0.7		4.7	dBm
Transmitter and dispersion eye closure(TDECQ)	TDECQ			3.4	dB
Optical receiver Characteristics
Parameter	Symbol	Min	Typical	Max	Unit	Notes
Receiver Wavelength Range		1324.5 1264.5	1331 1271	1337.5 1277.5	nm
Average Receiver Power Per Lane		-7.7		4.5	dBm
Receiver sensitivity (OMAouter)				-6.1	dBm
Stressed receiver sensitivity (OMAouter)				-4.1	dBm
Optical Power Input Overload	Pin-max	5			dBm
Receiver Reflectance	Rr			-26	dB

 

Ordering information

Part. No	Specifications
	Pack	Rate (Gbps)	Tx (nm)	Po (dBm)	RX	Sen (dBm)	Temp (℃)	Reach  (km)	DDM
QSFP28-100G-B10 Tx1270nm/Rx1330nm	QSFP28	100G	DFP 1270nm	-1.4~4.5	PIN	<-6.1	0~70	10	Y
QSFP28-100G-B10 Tx1330nm/Rx1270nm	QSFP28	100G	DFP 1330nm	-1.4~4.5	PIN	<-6.1	0~70	10	Y