IMS5214-8P6S L2+,10G,PoE

Industrial Managed 10G Switch

L2+ managed, 8*10/100/1000Base-T(PoE) + 2*1GBase-X + 4*10G/1G Base-X

Share on

Industrial Managed Switch 10G

L2+ managed, 8*10/100/1000Base-T(PoE) + 2*1GBase-X + 4*10G/1G Base-X

 

Overview

IMS5214 series L2+ managed switch adopt store-and-forward architecture and energy saving design, with 8*10/100/1000Base-T PoE port and 2*1GBase-X port +4*10G/1GBase-X port. At the same time, it supports the public Ethernet ring network protection protocol (ERPs), which greatly improves the networking flexibility and availability. L2+ management function makes installation get more easier and convenient, providing 1G high speed Rate downlink port and 10G uplink port to build a high-performance and reliable network. It also be used as outdoor Gigabit to 10 Gigabit convergence and gateway equipment.

IMS5214-8P6S Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at/bt complaint) are supported, as the Power Sourcing Equipment (PSE) device can deliver a full 15.4W / 30W / 60W of power to the remote PD device.

 

Features

  • ERPS (G.8032) Ring network protocol, high network availability
  • Non blocking high speed forwarding.
  • It provides 4*10G/1G SFP+ interfaces to form a ring network
  • Support POE power function, support IEEE 802.3af/at/bt standard
  • POE Budget management
  • It supports multiple three-layer ports and static routing
  • Web/CLI/Telnet/SNMP Management
  • 4KV surge protection for UTP
  • IP40 protection
  • Supports 8~15KV ESD protection
  • -40°C~85°C operating temperature
  • Low power consumption

 

Technical Specifications

Standards IEEE802.3 10BASE-T, IEEE802.3u 100Base-TX,

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X,

IEEE802.3ae 10 Gigabit Ethernet, IEEE802.1Q VLAN,

IEEE802.3x Flow control and back pressure, IEEE802.1d STP,

IEEE802.1w RSTP, IEEE802.1s MSTP,

IEEE802.3ad Link Aggregation, ITU-T G.8032

IEEE802.3af/at/bt PoE PoE+ PoE++

Switching Capacity 128Gbps/non-blocking
Packet forwarding rate 41.7Mpps
MAC Address Table 16K
Packet Buffer Space 12M
Copper 8*10/100/1000Base-T, RJ45 (PoE)
Fiber 2*1GBase-X + 4*10GBase-X, SFP Slot
Console RS232 (RJ45)
Key Switch Reset
POE 802.3af, 802.3at, 802.3bt

Pin Assignment:1,2+;3,6-

PoE Management

Power

 

48~58 VDC Redundant power inputs

Reverse Polarity

Power Consumption: ≤250W

Connector: 6-PIN Removable Terminal Block

LED Indicators PWR, RUN, Link/Act, Speed, Fiber Link
Operating Temperature -40 ˚C ~ +85 ˚C
Relative Humidity 5-95% (no condensation)
Housing IP40 Protection, Aluminum Alloy, fan-less
  Mounting DIN-rail;

wall-mounted/rack mounted kits optional

  Dimensions 169*117*50mm(device); 235*170*95mm(packing)
  Weight 0.75kg(device); 0.90kg(device with packing)
Protection

 

IEC 61000-4-5 Level 4

IEC 61000-4-4 Level 4

IEC 61000-4-2 Level 4

  Regulations CE/FCC/ROSH

 

Software Feature

L2 Features Port Features IEEE 802.3x flow control
Interface counters
Storm control
Link Aggregation Static aggregation
Dynamic aggregation, LACP
Mirror Port-based mirror
Spanning Tree IEEE802.1d STP
IEEE802.1w RSTP
IEEE802.1s MSTP
VLAN Port-based VLAN
Mac-address Table Static mac-address
Dynamic mac-address
Filtering mac-address
IVL mode
QINQ Port-based QinQ
VLAN-based QinQ
Flow-based QinQ
1:1 VLAN Mapping
ERPS (G.8032) Single ring
Sub-Ring
Multi-ring
Layer 2 Multicast IGMP V1 Snooping
IGMP V2 Snooping
IGMP V3 Snooping
IGMP Fast Leave
Static Multicast Entry
Port Isolate Port Isolate
L3 Features ARP Static ARP
Dynamic ARP
ARP proxy
IPV4 Static route
Security Features ACL IP Standard ACL
MAC extend ACL
IP extend ACL
QoS QoS Class, Remarking
SP, WRR queue scheduling
Ingress Port-based Rate-limit
Egress Port-based Rate-limit
Policy-based QoS
Dot1x Port Access Control
Mac-address Access Control
RADIUS Server
Management User Management Password protection
SNMP SNMP V1/V2C/V3
RMON Statistics
History
Alarm
Event
Web Management Web management
HTTP V1.1
Firmware Upgrade Firmware Upgrade
Syslog/Debug Support
IPV4/IPV6 Support
Diagnosis ping(ipv4)
ping(ipv6)
Trace route(ipv4)
Trace route(ipv6)
Application NTP NTP Client
DHCPv4 Snooping Trust Port
DHCP Client DHCPv4 Client
DHCPv6 Client
DHCP Server DHCPv4 Server
DHCPv6 Server
Telnet Telnet Server
Telnet Client
TFTP TFTP Client

 

Order Information

Model Description
IMS5214-8P6S L2+ Managed, 8*10/100/1000Base-T PoE + 2*1GBase-X + 4*10G/1GBase-X
Note: AC/DC power supply purchased separately

 

SEE WHAT WE CAN COOPERATE

Top Rated Fiber Optic Supplier

Ask For A Quote

We will contact you within 48 hours

View our Brochure of fiber optic products

AOA Tech-Fiber Optic Products Brochure

Note: Your email information will be kept strictly confidential.