MP-MP-LB MPO Loopback
MPO/MTP Patch Cords
MPO/MTP MM OM3 Loopback Patch Cords
Share on
Overview
MPO/MTP Loopback patch cords are designed to equipment and optical module transmission loop test, fit for different installation environment and easy to install on equipment and optical module transceiver. AOA Loopback are 100% factory tested and can meet your special requirements. All the MPO/MTP connector compliance with Telcordia GR-1435-Core Compliant.
Features
- Loss optical performance to meet data center power budgets
- IEC, EIA/TIA or Telecordia compliant
- 100% optical inspection and testing
- Standard and Reduced Bend Sensitivity OM3, OM4 and OS2 Fiber types
- Available in different lengths and colors
Applications
- Data Center Testing
- Equipment loop test
- Transceiver test
- Telecommunication networks
Technical Specifications
MTP MPO Optical Performance
| Type | Unit | Description | ||||
| MPO/MTP connector | — | Standard
SM MT |
Low Loss(Elite)
SM MT |
Standard
MM MT |
Low Loss(Elite)
MM MT |
|
| Insertion Loss | Typical | (dB) | 0.35 | 0.20 | 0.35 | 0.20 |
| Max | (dB) | 0.75 | 0.35 | 0.60 | 0.35 | |
| Return Loss | (dB) | APC≥60, PC≥50 | ≥20 for PC | |||
| Male / Female | — | Male: With Pins Female: Without Pins | ||||
| Wavelength | (nm) | Single Mode: 1310/1550 Multi-mode: 850/1300 | ||||
| Transmission Distance | (m) | OM4: 150m(40/100G), 500m(10G) OM3: 100m(40/100G), 300m(10G) | ||||
Geometry Parameters
| Type | Unit | Description | |
| Single Mode | Multi-mode | ||
| Radius of curvature X | (mm) | Min 2000 | Min 2000 |
| Radius of curvature Y | (mm) | Min 5 | Min 5 |
| Fiber Height | (nm) | 1000~3500 | 1000~3500 |
| Max.Diff.Height All | (nm) | Max 50 | Max 50 |
| Max.Diff.Height Adjl | (nm) | Max 300 | Max 300 |
| Tilt Angle X | (°) | -0.2~+0.2 | -0.2~+0.2 |
| Tilt Angle Y | (°) | PC:-0.2~+0.2;APC:7.8~8.2 | -0.2~+0.2 |
| Core Dip | (nm) | N/A | -100~+200 |
